• -20.5%
DERMAUTOLOGY PLASTIC FILLER 1KG.
  • DERMAUTOLOGY PLASTIC FILLER 1KG.

DERMAUTOLOGY PLASTIC FILLER 1KG.

DA8425402335352

Elastic polyester putty with peroxide included. Superior adhesion & flexibility for plastics.

Easy application!


ONLY FOR PROFESSIONAL USE

€11.95
€9.50 Save 20.5%

DERMAUTOLOGY PLASTIC FILLER 1KG. is the ideal solution for repairing plastic components in vehicles, especially those exposed to vibrations and flexing movements. This two-component elastic polyester putty, with peroxide included for easy preparation, offers exceptional adhesion to metal and remarkable flexibility, ensuring durable repairs that withstand the stresses of daily use.

Its advanced formulation balances extreme hardness with exceptional flexibility, facilitating both application and sanding to achieve a smooth and uniform surface, ready for the painting process. The dark gray color of the putty provides a good base for most plastic finishes. Prepare to restore the integrity and aesthetics of your vehicle's plastic parts with a product designed to deliver professional results.

Surface Preparation

The surface to be treated must be thoroughly degreased with detergent and rubbed with abrasive pads. It should then be cleaned a second time with detergent, rinsed with water, and air-dried.

Important Caution!

Do not apply this polyester putty directly to phosphatizing primers or 1-component and nitrocellulose products. On plastic surfaces, use 1K Plastic Primer before applying the primer.

Application Method

• This 2-component elastic polyester putty is recommended for repairing plastic elements of the car body.

Mixing Ratio (by weight)

• Putty: 100 parts
• Hardener: 2 parts (peroxide included in the hardener)
• Thoroughly mix both components until a uniform color is obtained. Stir carefully to avoid incorporating air into the mixture.

Layer Thickness

• The putty can be applied in several thin layers. Ensure that the previous layer is completely hardened before applying the next. Do not exceed a total thickness of 3 mm.

Pot Life

• 4 to 7 minutes at 20°C. Keep in mind that temperatures below 20°C will significantly extend this time.

Hardening Time

• 25 to 35 minutes at 20°C. Temperatures below 20°C will also extend the hardening time of the product.

Subsequent Treatment

• On this polyester putty, you can apply other 2-component polyester putties and 2-component spray polyester putties. On plastic surfaces, remember to use 1K Plastic Primer before the primer.

General Recommendations

• Excessive hardener can cause whitening of the enamel! During work with two-component products, the use of personal protective equipment is recommended. Avoid contact with eyes and skin. Use in well-ventilated areas and clean tools immediately after use.

Storage

• Store the product in tightly closed containers, in a dry and cool place, away from sources of fire and heat. Avoid direct sunlight. Attention!: Close the container tightly immediately after using the product and protect the hardener from heat.

Warranty Period

• PLASTIC polyester putty: 12 months from the date of manufacture. Hardener for polyester putty: 18 months from the date of manufacture.

DERMAUTOLOGY MASILLA PLASTICOS

1KG

UFI:KGRX-QXNS-2008-7C46

Warning:Danger: Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. Suspected of damaging the fetus. Causes organ damage through prolonged or repeated exposure (Inhalation). Keep away from heat, hot surfaces, sparks, open flames, and any other sources of ignition. No smoking. Wear protective gloves/protective mask/protective clothing/respiratory protection/protective footwear. IF ON SKIN: Wash with plenty of water. IF INHALED: Move the person outdoors and keep them in a position comfortable for breathing. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. IF exposed or concerned: Consult a doctor. In case of fire: Use ABC powder extinguisher to extinguish. Dispose of contents/container in accordance with regulations for hazardous waste or packaging waste, as applicable. Supplemental information: Contains Cobalt Bis(2-ethylhexanoate). May cause an allergic reaction.

DA8425402335352