RM BLENDING ADD AM 2A54 SPRAY 0,4L

Reference AM2A54

Blending additive in aerosol form. The AM 2A54 from RM smooths transition areas through blending processes. Packaging: 0.4LT

ONLY FOR PROFESSIONAL USE

€59.75

Description

The BLENDING ADD AM 2A54 thinner for blending belongs to RM's Advance Series. Its standout feature is its ability to smooth transition areas through blending processes.

Thanks to its spray presentation, the product is ready to use. It is essential to shake well before use.

IMPORTANT NOTES

· Do not use deformed aerosol cans.
· When shaking the can, avoid striking it against solid objects.
· During shaking, the mixing balls are released. Avoid impacts, friction, and bumps.
· Storage temperature: 5–45 °C.
· Shelf life: 60 months.

INSTRUCTIONS FOR USE

· Shake for 2 minutes.
· Apply 2–3 spray coats to the fade-out areas of the clearcoat to smooth them.
· Drying: Follow the drying recommendation for the RM Advance Series clearcoat used.

Note: For automotive refinishing, always adhere to vehicle manufacturers' repair instructions, particularly regarding installed sensor technology, in addition to the application guidelines provided.

AM 2A54 BLENDINGADD 0,4L

0,4L

UFI: JUAU-KCWH-K000-9KSF

Warning:Danger. Extremely flammable aerosol. Pressurized container: may burst if heated. May cause drowsiness or dizziness. Do not pierce or burn, even after use. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Call a poison center or doctor if the person feels unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Store in a well-ventilated place. Keep the container tightly closed. Dispose of contents and container at a hazardous or special waste collection point. Do not spray on an open flame or other ignition source.