

PPG Clearcoat D8115 (Matt) is designed for use over ENVIROBASE® High Performance waterborne basecoat.
This versatile 2K urethane clearcoat is part of the Deltron Matt Clearcoat system, designed to reproduce a wide range of gloss levels for specific repairs of complete vehicles or areas with original low-gloss finishes over a 2-coat or multi-coat system (e.g., overall matt finish for Mercedes cars). To allow for gloss variations due to color, model, etc., the mixture with PPG Clearcoat D8117 (semi-gloss, also available at DS Color) can be varied to achieve the correct match with the vehicle being repaired. Clearcoat D8115 or its mixture can be used on rigid plastics without the need for special additives.
Drying
· Fully dry at 60°C*: 30 – 35 minutes
· Fully dry with IR (medium wave): 8 - 15 minutes (depending on color)
Note: Baking times at metal temperature. Additional time must be added for the metal to reach the recommended temperature.
Hardener
· PPG Deltron UHS D8302
1L
UFI: Q0NT-N3J9-U00C-UDY1
Warning:Warning Flammable liquids and vapors. May cause an allergic skin reaction. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Wear protective gloves. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Avoid release to the environment. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with local, regional, national, and international regulations. Repeated exposure may cause skin dryness or cracking. Hazardous components: n-Butyl acetate and reaction product of bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate and methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate.