- -9.52%

CATALYZE ONLY WITH THE CORRESPONDING PEROXIDE
DERMAUTOLOGY QUICKSOFT WHITE POLYESTER PUTTY 1LT is a fast, smooth, and lightweight polyester putty designed to offer an efficient solution for bodywork repairs. Thanks to its advanced resin-based manufacturing technology, this putty has a very light specific gravity (only 1.45kg/L), which allows it to fill the same amount as a high-fill putty with a smaller quantity of product. One of its most outstanding features is its ultra-fast drying, being 40% faster than conventional putties, ready to sand in just 8-10 minutes.
This putty offers excellent adhesion on various substrates, including galvanized steel, aluminum, and other metals, as well as wood and polyester sheets. It is very easy to work with, thanks to its high thixotropy and creaminess, and provides a non-porous white finish. Furthermore, it allows for excellent sanding from P150 onwards and can be used both for filling and finishing. The peroxide necessary for its application is included.
Substrate Preparation
The surface to be treated must be completely degreased, dry, and dust-free. For greater adhesion, surface sanding of the part is recommended.
Mixing Instructions
· 50 grams of putty (100%)
· 1.5 grams of peroxide (3%)
· Mix both products well until color uniformity is achieved.
Important Note
· An excessive amount of peroxide or hardener can cause shadowing or grooves in the upper layers. Quantities below the recommended amount can lengthen the product's drying time.
Drying
· Ready to sand: 8-10 minutes (at 20 degrees)
· Mixture pot life: 3-4 minutes (at 20 degrees)
Important Note
· The use of infrared (IR) lamps or any drying tool that does not allow temperature control is not recommended. The maximum temperature for putty drying should be 45 degrees.
Sanding
· Sanding between P150 and P320 is recommended.
1L
UFI:TSNX-A1YK-820K-YFJC
Warning:Danger: Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. Suspected of impairing fertility or causing harm to the fetus. Causes damage to organs through prolonged or repeated exposure. If medical advice is needed, have the product container or label at hand. Keep out of reach of children. Seek special instructions before use. Keep away from heat, sparks, open flames, or hot surfaces. — No smoking. Do not breathe dust/fume/gas/mist/vapors/spray. Wear protective gloves/clothing/eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF exposed or concerned: Consult a doctor. Keep locked up. Dispose of contents/container in accordance with local, regional, national, or international regulations. Contains styrene.