• -25.65%
RM CLEARCOAT C2A44 FAST TOP 1LT
  • RM CLEARCOAT C2A44 FAST TOP 1LT

RM CLEARCOAT C2A44 FAST TOP 1LT

C2A44

RM CLEARCOAT C2A44 FAST TOP 1LT: Fast-drying clearcoat for higher productivity with R-M H 2A14 (fast), H 2A24 (standard), H 2A34 (fast) hardeners.

Quick and efficient repairs!


ONLY FOR PROFESSIONAL USE

€46.40
€34.50 Save 25.65%

RM FAST TOP CLEARCOAT C2A44 1LT, known as FastTOP, is the ideal solution for workshops looking to maximize productivity without compromising finish quality. This fast-drying clearcoat from the Advance Series, specially designed for use with ONYX HD basecoat, allows for quick repairs, from minor damage to a complete car side, optimizing turnaround times. For exceptional performance, it is recommended to combine it with the R-M H 2A14 (fast), H 2A24 (standard), or H 2A34 (slow) hardener, selecting the most suitable one according to ambient temperature.

The main advantage of FastTOP C2A44 Clearcoat lies in its drying speed, which allows for accelerated work processes and increased workshop efficiency. Despite its speed, it guarantees a high-gloss and durable finish, characteristic of RM products. Remember to select the appropriate hardener and thinner based on ambient temperature and the size of the surface to be painted for optimal results.

Application

· This fast-drying clearcoat is formulated for the Advance Series and is optimally applied over ONYX HD basecoat. The selection of the hardener (R-M H 2A14 fast, H 2A24 standard, or H 2A34 slow) will depend on the ambient temperature and the size of the object to be painted. The selection of the thinner (R-M R 2A14 fast, R 2A24 medium, or R 2A34 slow) will also be adjusted to these conditions.

Recommended Hardeners

· R-M H 2A14 (fast)
· R-M H 2A24 (standard)
· R-M H 2A34 (slow)

Recommended Thinners

· R-M R 2A14 (fast)
· R-M R 2A24 (medium)
· R-M R 2A34 (slow)

Mixing Ratio

· Hardener 50% by volume. Thinner 10% by volume.

Drying

· At 20 °C: 8 hours.
· At 60 °C: 20-25 minutes.
· Infrared (short wave): 10 minutes.

Important Notes

· It is essential to select the correct hardener and thinner according to the ambient temperature and the size of the object to be painted to ensure proper drying and an optimal finish. Polishing should be done after the specified drying and cooling time has elapsed.

Main features

· Fast-drying clearcoat to increase productivity.
· Specially designed for ONYX HD basecoat from the Advance Series.
· Allows for quick repairs on various surfaces.
· Compatible with a range of hardeners to adapt to different conditions.

Benefits

· Accelerates work processes and increases workshop productivity.
· Offers a high-gloss and durable finish.
· Versatile for repairs of different sizes.
· Allows adaptation of drying to environmental conditions through hardener and thinner selection.

Notes

· Select the appropriate hardener and thinner according to environmental conditions and the size of the part.
· Observe drying and cooling times before polishing.
· Consult the technical data sheet for detailed application information.
· Product intended for professional use only.

C 2A44 FASTTOP 1L R2

1L

UFI: P0PP-TF89-Y00A-45P2

Warning: Flammable liquid and vapour. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. Suspected of causing cancer. Harmful to aquatic life with long lasting effects. Obtain special instructions before use. Wear protective gloves, protective clothing and eye protection or face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER or physician if you feel unwell. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container to hazardous or special waste collection point. Repeated exposure may cause skin dryness or cracking. Hazard determining component(s) for labelling: 4-methylpentan-2-one, n-butyl acetate, Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate

C2A44