• -11.83%
RM C2P45 FAST TUNE-R CLEAR COAT 5LT
  • RM C2P45 FAST TUNE-R CLEAR COAT 5LT

RM C2P45 FAST TUNE-R CLEAR COAT 5LT

C2P45

RM Speed Finish Clearcoat 5LT: Pioneer Series eSense R-M clearcoat. Fast drying. Hardeners H 2P05, H 2P15, H 2P25, H 2P35.


ONLY FOR PROFESSIONAL USE

€335.65
€295.95 Save 11.83%

RM SPEED Finish-R C 2P45 is an eSense clearcoat from the Pioneer Series designed for the R-M waterborne basecoat system. This fast drying clearcoat offers Eco effectiveness and is perfect for spot repairs, as well as for multiple vertical or horizontal parts. It comes in a 5-liter can with a recommended mixing ratio of 3:1:1 (Clearcoat : eSense Hardener : eSense Thinner).

It is important to mix well and filter before applying. The appropriate hardener and thinner should be selected according to the ambient temperature and the size of the object to be painted.

Recommended R-M Hardeners

· H 2P05: eSense plus hardener for single-stage enamel.
· H 2P15: eSense fast hardener for single-stage enamel.
· H 2P25: eSense medium hardener for single-stage enamel.
· H 2P35: eSense slow hardener for single-stage enamel.

Recommended R-M Thinners

· R 2P15: eSense fast thinner.
· R 2P25: eSense medium thinner.
· R 2P35: eSense slow thinner.

Approximate Drying Times

· Drying at 20 °C: 5-6 hours
· Drying at 40 °C: 30-45 minutes
· Drying at 60 °C: 10-15 minutes
· Infrared (short wave): 10 minutes

Note: Drying times may vary depending on the hardener and application selected.

C 2P45 SPEED FINISH-R 5L

5L

UFI: NEPM-1D9J-H00H-4YCG

Warning: Flammable liquid and vapour. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects. Wear protective gloves, protective clothing and eye protection or face protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container to hazardous or special waste collection point. Repeated exposure may cause skin dryness or cracking. Hazard determining component(s) for labelling: benzoic acid, n-butyl acetate, Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate

C2P45