• -9.34%
RM C2P52 AMBIENT DRYING CLEARCOAT 4LT
  • RM C2P52 AMBIENT DRYING CLEARCOAT 4LT

RM C2P52 AMBIENT DRYING CLEARCOAT 4LT

C2P52

RM Ambient Drying Clearcoat 4LT: Pioneer Series eSense R-M clearcoat. Fast drying. Hardeners H 2P05, H 2P15, H 2P25, H 2P35.


ONLY FOR PROFESSIONAL USE

€220.50
€199.90 Save 9.34%

RM EASY AIR Finish-R C 2P52 is an eSense clearcoat from the Pioneer Series designed for the R-M waterborne basecoat system. This fast drying clearcoat offers Eco effectiveness and is ideal for multiple vertical and horizontal panels, as well as for minor damage repair.

It is important to mix well and filter before applying. The appropriate hardener should be selected according to the ambient temperature and the size of the object to be painted. Ambient temperature and film build can greatly affect the drying behavior.

Recommended R-M Hardeners

· H 2P05: eSense plus hardener for single-stage enamel.
· H 2P15: eSense fast hardener for single-stage enamel.
· H 2P25: eSense medium hardener for single-stage enamel.
· H 2P35: eSense slow hardener for single-stage enamel.

Approximate Drying Time

· Drying at 20 °C: 2-3 hours

Note: Drying times may vary depending on the hardener and application selected.

C 2P52 EASY AIR FINISH-R 4L

4L

UFI: CSYN-RC0S-600W-YCSP

Warning: Flammable liquid and vapour. May cause an allergic skin reaction. Causes serious eye irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects. Wear protective gloves, protective clothing and eye protection or face protection. Avoid breathing dust/fume/gas/mist/vapours/spray. Call a POISON CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container to hazardous or special waste collection point. Repeated exposure may cause skin dryness or cracking. Hazard determining component(s) for labelling: benzoic acid, n-butyl acetate, Bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate, Methyl 1,2,2,6,6-pentamethyl-4-piperidyl sebacate

C2P52