DE BEER MM 500 WHITE SERIE 500 3,5LT
  • DE BEER MM 500 WHITE SERIE 500 3,5LT

DE BEER MM 500 WHITE SERIE 500 3,5LT

MM500

De Beer MM 500 White from the BeroBase 500 Series. It mixes 1:1 with Uni Thinners (1-141, 1-151, 1-161, 1-181) for a durable, professional finish.

De Beer 500 Series (BeroBase) colors are always used in combination with the MM 577 or MM 588 base additive, which is essential in metallic and pearlescent shades to ensure the correct orientation of the particles and a perfect optical finish.


ONLY FOR PROFESSIONAL USE

€149.95

At DS COLOR we merge over 110 years of history with the most advanced refinishing technology. The MM 500 White basecoat, an integral part of our BeroBase 500 Series system, is designed for passenger cars, commercial vehicles, and coaches, providing an unparalleled optical result and superior resistance to external agents. This product ensures that every repair not only looks flawless but also lasts over time.

The BeroBase 500 System: profitability and efficiency

De Beer's BeroBase 500 Series was conceived to simplify your work in the workshop and maximize profitability. Its simple 1:1 mixing ratio with thinner eliminates guesswork, allowing for fast preparation and precise application. Thanks to De Beer's color technology, you will achieve a perfect color match on the first attempt, compatible with most OEM finishes. Furthermore, its optimized color palette reduces inventory and minimizes waste, making this series a smart investment.

Technical data for MM 500 White

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588

Recommended thinners: For optimal performance, this product is mixed with the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical properties

With a base of special physical drying resins, it features an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l, with 12% solids by volume.

Application guide for a superior finish

For a flawless result, the surface must be properly prepared: clean it with 1-951 Silicone Remover and sand with P400 grit or finer. Apply the product in 2-3 coats with a thickness of 15-25 µm. An air pressure of 1.5-1.8 bar is recommended for HVLP and HE spray guns. The air-drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 500 BEROBASE 500 SERIES WHITE

3,5L

UFI:

Warning: Flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice or attention. Store in a well-ventilated place. Keep container tightly closed.Dispose of contents and container in accordance with all local, regional, national andinternational regulations. Contains formaldehyde. May produce an allergic reaction.Warning! Hazardous respirable droplets may be formed when sprayed. Do notbreathe spray or mist.

MM500