DE BEER MM 501 TRANSPARENT WHITE SERIE 500 1LT

Reference MM501

De Beer MM 501 Transparent White from the 500 Series. 1:1 mixing ratio with Uni Thinner (1-141, 1-151, 1-161, 1-181) for high-quality results.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€49.25

Description

At DS COLOR excellence in automotive refinishing starts with trusted products. The De Beer MM 501 Transparent White is an essential thinner from the prestigious BeroBase 500 Series, a paint solution developed for commercial vehicles, passenger cars, and coaches. Its formulation is distinguished by an exceptional optical effect and superior durability, ensuring a brilliant and long-lasting finish.

BeroBase 500 Series: performance and efficiency in one system

The BeroBase 500 Series system is designed to optimize your workshop's workflow. Its straightforward 1:1 mixing ratio with Thinner simplifies preparation, allowing you to focus on application. De Beer's advanced color technology ensures a precise match, even on the most complex jobs. With a compact color range, this system becomes an efficient investment that minimizes inventory and reduces waste. Moreover, its long shelf life of up to two years increases your business's profitability.

Technical specifications of MM 501 Transparent White

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Components: This product is mixed with the following Uni Thinners for optimal performance:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Chemical base

Special physical drying resins.

Physical data

It has an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l, with 12% solids by volume.

Application instructions for a perfect finish

Ensure proper surface preparation: it must be cleaned with 1-951 Silicone Remover and sanded with P400 grit or finer. The product is applied in 2-3 coats with a thickness of 15-25 µm. For effect colors, an additional spray coat is recommended with an air pressure of 1.2-1.5 bar. The air-drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 501 BEROBASE 500 SERIES TRANSPARENT WHITE

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate and formaldehyde. May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.