

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.
At DS COLOR we know that the foundation of a perfect job is the quality of the materials. The De Beer MM 512 Mix Black basecoat is an essential component of the BeroBase 500 Series system, a product line that combines over a century of heritage with the highest technology. This solution has been formulated to offer exceptional performance in the repair of passenger cars, commercial vehicles, and coaches, providing a finish with a superior optical effect and unparalleled durability.
The BeroBase 500 System: eficiency and precision
The BeroBase 500 Series stands out for its focus on efficiency. Its simplified 1:1 mixing ratio with thinner eliminates complications, allowing for fast and precise preparation. Thanks to De Beer's advanced color technology, this system ensures an exact color match on the first application, even on the most complex jobs. In addition, its optimized color palette reduces inventory, which translates into a more profitable investment and less waste for your workshop.
Technical details of MM 512 Mix Black
Base Additives
For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:
· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)
Compatible Thinners: The product mixes perfectly with the following Uni Thinners to achieve the desired finish:
· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow
Physical properties
Its chemical base consists of special physical drying resins. It has an RTS viscosity of 15-17 Dincup 4/20°C, with a specific weight of 0.926 kg/l and 12% solids by volume.
Application tips for a flawless result
To obtain a professional finish, the surface must be properly prepared. Clean it with 1-951 Silicone Remover and sand with P400 grit or finer. Apply the product in 2-3 coats with a thickness of 15-25 µm. For effect colors, a final spray coat with reduced air pressure (1.2-1.5 bar) is recommended. Air-drying time at 20°C is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.
3,5L
UFI:
Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.