- -13.1%

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.
At DS COLOR we are dedicated to providing paint solutions that simplify your work without compromising on quality. The De Beer MM 513B Metallic Bright is a key component of the BeroBase 500 Series system, a line of basecoats designed for passenger cars, commercial vehicles, and coaches. This product stands out for its ability to generate a superior optical effect and high durability, ensuring that every refinishing job achieves a professional and long-lasting finish.
The BeroBase 500 System: smart paint for your workshop
De Beer's BeroBase 500 Series revolutionizes the painting process with its focus on efficiency. The 1:1 mixing ratio with thinner simplifies preparation, eliminating the need for complex calculations and speeding up the workflow in the workshop. Thanks to its advanced color technology, this system ensures precise matching with most OEM finishes, even on the most demanding jobs. Additionally, as a streamlined series with fewer colors, it represents a cost-effective investment that reduces stock and waste.
Technical details of MM 513B Metallic Bright
Base Additives
For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:
· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)
Components: For use, the product must be combined with the following Uni Thinners:
· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow
Physical Properties
The product's chemical base consists of special physical drying resins. Its RTS viscosity is 15-17 Dincup 4/20°C, with a specific weight of 0.926 kg/l and 12% solids by volume.
Steps for a flawless application
For the best result, the surface must be cleaned with 1-951 Silicone Remover and sanded with P400 grit abrasive or finer. The product is applied in 2-3 coats with a thickness of 15-25 µm. To maximize the metallic effect, an additional spray coat with lower air pressure (1.2-1.5 bar) is recommended. The air-drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.
3,5L
UFI:
Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.