DE BEER MM 513C METALLIC COARSE SERIE 500 3,5LT

Reference MM513C

De Beer MM 513C Metallic Coarse, BeroBase 500 Series. 1:1 ratio with Uni Thinner (1-141, 1-151, 1-161, 1-181) for an exceptional finish.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€136.25

Description

At DS COLOR we merge the legacy of expertise with cutting-edge innovation. The De Beer MM 513C Metallic Coarse basecoat is a key component of the BeroBase 500 Series system, a state-of-the-art solution designed for refinishing passenger cars, commercial vehicles, and buses. This product not only provides a stunning visual effect but also offers excellent durability and gloss retention, ensuring a professional finish that stands the test of time.

The BeroBase 500 Series: a symbol of precision and efficiency

De Beer has perfected the BeroBase 500 Series to make your work simpler and more profitable. The 1:1 mixing ratio with thinner drastically simplifies preparation, eliminating the need for complex calculations and enabling a hassle-free application. Thanks to advanced color technology, this system ensures an exact match with OEM finishes, even on the most challenging jobs. Its streamlined color range means less stock and less waste, making this series a smart investment for any workshop.

Technical specifications of MM 513C Metallic Coarse

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Compatible thinners: For an optimal result, this product should be used with the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical properties

The chemical base consists of special physical drying resins. It has an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l, with a 12% solids by volume.

Application guide for a premium finish
To achieve a flawless finish, the surface must be properly prepared: clean with 1-951 Silicone Remover and sand with P400 grit or finer. Apply the product in 2-3 coats with a thickness of 15-25 µm. To enhance the metallic effect, an additional spray coat with reduced air pressure (1.2-1.5 bar) is recommended. Air drying at 20°C (68°F) is fast: 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 513C BEROBASE METALLIC COARSE

3,5L

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.