• -10.81%
DE BEER MM 513VC METALLIC VERY COARSE SERIE 500 1LT
  • DE BEER MM 513VC METALLIC VERY COARSE SERIE 500 1LT

DE BEER MM 513VC METALLIC VERY COARSE SERIE 500 1LT

MM513VC

De Beer MM 513VC Metallic Very Coarse. From the BeroBase 500 Series, mixes 1:1 with Uni Thinners (1-141, 1-151, 1-161, 1-181) for a perfect finish.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.


ONLY FOR PROFESSIONAL USE

€42.55
€37.95 Save 10.81%

At DS COLOR quality and efficiency are the result of experience. With a heritage stretching back over 110 years, De Beer Refinish offers the MM 513VC Metallic Very Coarse basecoat, a key pigment in the BeroBase 500 Series system. This solution has been developed to provide an extraordinary visual effect and excellent gloss retention, ensuring a high-end finish on passenger cars, commercial vehicles, and coaches.

The BeroBase 500 System: innovation that simplifies

The BeroBase 500 Series from De Beer was designed to optimize your workflow. Its simple 1:1 mixing ratio with thinner eliminates guesswork, allowing for fast and precise preparation and application. Thanks to leading color technology, this series guarantees an exact color match with OEM finishes, even on the most complex jobs. Furthermore, its compact color palette reduces stock costs and minimizes waste, making it a profitable and sustainable investment for your workshop.

Technical details of MM 513VC Metallic Very Coarse

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Compatible thinners: This base is used with the following Uni Thinners for optimal performance:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical specifications

The product has a base of special physical drying resins, with an RTS viscosity of 15-17 Dincup 4/20°C. Its specific weight is 0.926 kg/l and a solids by volume percentage of 12%.

Application guide for a professional finish

For a flawless result, the surface must be clean and prepared using 1-951 Silicone Remover and sanding with P400 grit or finer. Application is done in 2-3 coats with a thickness of 15-25 µm. For this metallic color, an additional spray coat is recommended with a reduced air pressure (1.2-1.5 bar) for perfect particle orientation. Air drying at 20°C (68°F) takes 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM513VC