DE BEER MM 513VF METALLIC VERY FINE SERIE 500 3,5LT

Reference MM513VF

De Beer MM 513VF Metallic Very Fine from the 500 Series. 1:1 mixing ratio with Uni Thinners (1-141, 1-151, 1-161, 1-181). High-quality finishes.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€175.00

€149.50 Save 14.57%

Description

At DS COLOR the legacy of excellence is conveyed in every can of paint. With over a century of expertise, De Beer Refinish brings you the MM 513VF Metallic Very Fine basecoat, a top-tier color solution within the renowned BeroBase 500 Series. This product is designed for the refinishing of passenger cars, commercial vehicles, and coaches, providing a stunning metallic effect, outstanding durability, and excellent long-term gloss retention.

The BeroBase 500 Series: efficiency and precision in your workshop

The BeroBase 500 Series revolutionizes the way you work in the workshop. With its innovative 1:1 mixing ratio with thinner, preparation is surprisingly simple, saving you time and effort. De Beer's advanced color technology ensures a precise match to OEM finishes, even on the most complex jobs. Furthermore, its streamlined color range reduces the need for excessive inventory, optimizing your investment and minimizing waste.

Technical data for MM 513VF Metallic Very Fine

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Compatibility: This product is mixed with the following Uni Thinners for optimal performance:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical properties

Based on special physical drying resins, this product has an RTS viscosity of 15-17 Dincup 4/20°C. Its specific weight is 0.926 kg/l, and its solids content is 12% by volume.

Application guide for show-quality results

Achieve a professional finish by preparing the surface. Clean it with 1-951 Silicone Remover and sand it with P400 grit abrasive or finer. The product is applied in 2-3 coats of 15-25 µm thickness. To maximize the metallic effect, a final spray coat with lower air pressure (1.2-1.5 bar) is recommended. The air drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 513VF BEROBASE 500 SERIES METALLIC VERY FINE

3,5L

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye damage. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations.