DE BEER MM 527 OXIDE TRANSPARENT YELLOW SERIE 500 1LT
  • DE BEER MM 527 OXIDE TRANSPARENT YELLOW SERIE 500 1LT

DE BEER MM 527 OXIDE TRANSPARENT YELLOW SERIE 500 1LT

MM527

De Beer BeroBase 500 Series MM 527 Oxide Transparent Yellow. 1:1 mixing ratio with Uni Thinners (1-141, 1-151, 1-161, 1-181) for an exceptional finish.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.


ONLY FOR PROFESSIONAL USE
€62.15

At DS COLOR painting excellence is achieved by combining a legacy of quality with the most modern innovation. The MM 527 Oxide Transparent Yellow basecoat is a key component of the BeroBase 500 Series system, an advanced paint solution designed for passenger cars, commercial vehicles, and coaches. This formula has been carefully crafted to deliver an outstanding optical effect, along with high durability and gloss retention that remains unchanged over time.

BeroBase 500 Series: professional efficiency and performance

De Beer's BeroBase 500 system was designed to optimize workshop workflow. Its convenient 1:1 mixing ratio with thinner simplifies preparation, allowing for quick and uncomplicated application. With over 110 years of heritage, De Beer has developed cutting-edge color technology that ensures an exact color match from the very first attempt. The series, with its streamlined color palette, represents a profitable investment that reduces stock and minimizes waste.

Technical specifications of MM 527 Oxide Transparent Yellow

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Mixing components: For optimal performance, this product should be used with the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Key properties

The chemical base consists of special physical drying resins. The RTS viscosity is 15-17 Dincup 4/20°C and it has a specific weight of 0.926 kg/l, with a 12% solids by volume.

Application guide for a flawless finish

To get the best result, the surface must be clean and prepared using 1-951 Silicone Remover and sanding with P400 grit or finer. Apply 2 to 3 coats with a thickness of 15-25 µm, using an air pressure of 1.5-1.8 bar for HVLP and HE spray guns. Air drying at 20°C (68°F) takes 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 527 BEROBASE 500 SERIES OXIDE TRANSPARENT YELLOW

1L

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate and formaldehyde. May produce an allergic reaction.

MM527