DE BEER MM 530 VIOLET SERIE 500 1LT

Reference MM530

De Beer MM 530 Violet from the 500 Series. Mixes 1:1 with Uni Thinners (1-141, 1-151, 1-161, 1-181). Guarantees a perfect and long-lasting finish.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€42.80

Description

At DS COLOR master refinishing is achieved with products that combine quality and simplicity. The De Beer MM 530 Violet basecoat is part of the prestigious BeroBase 500 Series line, developed for all types of vehicles, from passenger cars to commercial vehicles and coaches. This paint is characterized by its excellent optical result and superior durability, ensuring every job shines with a professional, long-lasting finish.

BeroBase 500 Series: the system designed for your success

De Beer has created the BeroBase 500 Series with a clear goal: to optimize your workshop's efficiency. Its simple 1:1 mixing ratio with thinner simplifies the preparation and application process, allowing you to work faster and more precisely. With one of the most advanced color technologies on the market, this series guarantees a perfect color match from the first application, being fully compatible with most OEM finishes. Furthermore, its simplified color palette reduces inventory costs and waste.

Technical details of MM 530 Violet

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Thinners: For optimal performance, the mixture is made with the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Specifications

The chemical base of the product is special physical drying resins. It has an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l, with a solids by volume percentage of 12%.

Instructions for a flawless result

To achieve maximum quality, the surface must be properly prepared, cleaning it with 1-951 Silicone Remover and sanding with P400 grit or finer. Application is done in 2-3 coats with a thickness of 15-25 µm. For effect colors, an additional spray coat is recommended with lower air pressure (1.2-1.5 bar). Air drying at 20°C (68°F) takes 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 530 BEROBASE 500 SERIES VIOLET

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take offcontaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty ofwater. IF IN EYES: Rinse cautiously with water for several minutes. Remove contactlenses, if present and easy to do. Continue rinsing. If eye irritation persists: Getmedical advice or attention. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate and formaldehyde. May produce an allergic reaction.