DE BEER MM 540 LEADFREE YELLOW ORANGE SERIE 500 1LT

Reference MM540

De Beer MM 540 Leadfree Yellow Orange from the BeroBase 500 Series. Used with Uni Thinner (1-141, 1-151, 1-161, 1-181) for an exceptional finish.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€47.95

Description

At DS COLOR we believe that mastery in vehicle refinishing comes from the right tools. We present the De Beer MM 540 Leadfree Yellow Orange basecoat, a distinctive color from the renowned BeroBase 500 Series system. This product line is the perfect choice for the repair of passenger cars, commercial vehicles, and coaches, thanks to its superior optical effect and outstanding durability, which ensure the color remains vibrant and glossy over time.

The BeroBase 500 System: simplicity and precision in every mix

The BeroBase 500 system has been designed with the professional's efficiency in mind. Its intuitive 1:1 mixing ratio with thinner dramatically simplifies the preparation process, eliminating the possibility of errors and accelerating the workflow in your workshop. De Beer has incorporated its advanced color technology to ensure an impeccable color match on the first application, making it easier to work with the most complex OEM finishes. This system, with its streamlined color range, reduces inventory costs and waste, making it a smart investment for any workshop.

Technical data for MM 540 Leadfree Yellow Orange

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Components: This color base has been formulated to be used exclusively with the following Uni Thinners to achieve perfect results:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical properties

Its composition is based on special physical drying resins. The RTS viscosity is between 15-17 Dincup 4/20°C, with a specific weight of 0.926 kg/l and 12% solids by volume.

Application guide for maximum performance

For a flawless result, the surface must be clean and prepared. Clean it with 1-951 Silicone Remover and sand with P400 grit or finer. Apply the product in 2-3 coats with a thickness of 15-25 µm. For effect colors, an additional spray coat is recommended with a lower air pressure (1.2-1.5 bar). The air-drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 540 BEROBASE 500 SERIES YELLOW ORANGE

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take offcontaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty ofwater. IF IN EYES: Rinse cautiously with water for several minutes. Remove contactlenses, if present and easy to do. Continue rinsing. If eye irritation persists: Getmedical advice or attention. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate and formaldehyde. May produce an allergic reaction.