

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.
At DS COLOR we believe that painting is an art that requires the perfect blend of tradition and technology. The De Beer MM 560 Mica Red basecoat is a key component of the BeroBase 500 Series system, a product line created to excel in the repair of passenger cars, commercial vehicles, and coaches. Its advanced formula guarantees a spectacular visual effect and remarkable durability, keeping the finish bright and vibrant over time.
The BeroBase 500 Series: innovation for the modern workshop
De Beer has designed the BeroBase 500 Series to streamline your work and boost your business's profitability. With a 1:1 mixing ratio with thinner, product preparation is incredibly fast and simple, freeing you from complex mixing formulas. The system is compatible with the most demanding OEM finishes and features pioneering technology to ensure an exact color match on the first try. Furthermore, its optimized color palette reduces the need for a large inventory, making it a smart and profitable investment for your workshop.
Specifications of MM 560 Mica Red
Base Additives
For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:
· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)
Compatible Thinners
The product is used in conjunction with the following Uni Thinners for optimal performance:
· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow
Physical properties
Its chemical base consists of special physical drying resins. It has an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l, with a 12% solids by volume.
Application guide for a professional finish
For a flawless result, start by cleaning the surface with 1-951 Silicone Remover and sanding with P400 grit or finer. The product is applied in 2-3 coats of 15-25 µm. For effect colors, an additional spray coat is recommended with a reduced air pressure (1.2-1.5 bar). Air drying at 20°C (68°F) takes 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.
1L
UFI:
Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains methyl methacrylate, n-butyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.