DE BEER MM 563 MICA YELLOW SERIE 500 1LT

Reference MM563

De Beer MM 563 Mica Yellow from the BeroBase 500 Series. Mixes 1:1 with Uni Thinner (1-141, 1-151, 1-161, 1-181) for professional results.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€52.55

Description

At DS COLOR superior quality is combined with efficiency. With a heritage of over 110 years, De Beer Refinish offers you the MM 563 Mica Yellow basecoat, an advanced solution that is part of the BeroBase 500 Series system. This product has been developed for cars, commercial vehicles, and coaches, providing an exceptional optical effect and high gloss retention, which results in durable, high-quality finishes.

BeroBase 500 Series: performance and simplicity in mixing

The BeroBase 500 Series system simplifies the refinishing process. Its 1:1 mixing ratio with thinner eliminates complex calculations, streamlining preparation and application. With De Beer's most advanced color technology, the 500 Series ensures a precise match, even on the most complex jobs, and is compatible with most OEM finishes. As a streamlined system with fewer colors, it minimizes the stock required and product waste, maximizing profitability.

Technical characteristics of MM 563 Mica Yellow

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Chemical base

Special physical drying resins.

Components

This color base is used with the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical Data

RTS viscosity is 15-17 Dincup 4/20°C and its specific weight is 0.926 kg/l, with a % Vol. of solids of 12.

Preparation and application for an elite finish

To achieve a flawless finish, the surface must be properly prepared:

· Surface preparation: Clean with 1-915 Silicone Remover and sand with P400 grit or finer.
· Application: Apply 2-3 coats with a thickness of 15-25 µm. For effect colors, an additional spray coat is recommended with lower pressure (1.2-1.5 bar).
· Drying: Air drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 563 BEROBASE 500 SERIES MICA YELLOW

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains Fatty acids, C14-18 and C16-18-unsatd., maleated, methyl methacrylate, nbutyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.