DE BEER MM 571 XIRALLIC WHITE SERIE 500 1LT
  • DE BEER MM 571 XIRALLIC WHITE SERIE 500 1LT

DE BEER MM 571 XIRALLIC WHITE SERIE 500 1LT

MM571

De Beer BeroBase 500 Series MM 571 Xirallic White. 1:1 mixing ratio with Uni Thinners (1-141, 1-151, 1-161, 1-181). Innovative and highly durable finish.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.


ONLY FOR PROFESSIONAL USE
€116.80

Automotive refinishing mastery requires products that blend a leader's heritage with cutting-edge technology. At DS COLOR, we present the MM 571 Xirallic White basecoat, a leading solution within De Beer's prestigious BeroBase 500 Series system. Created for passenger cars, commercial vehicles, and coaches, this paint is distinguished by an outstanding optical effect and superior resistance to the elements, ensuring a flawless result that maintains its gloss over time.

BeroBase 500 Series: effortless performance and efficiency
The BeroBase 500 Series was designed to optimize every step of your work. Its ingenious 1:1 mixing ratio with thinner eliminates guesswork, making preparation straightforward and application seamless. De Beer has incorporated pioneering color technology to ensure a precise match with the most complex OEM finishes, making even the most challenging jobs easier. With a streamlined color catalog, this series not only reduces stock and waste but also increases profitability opportunities for your workshop.

Technical specifications of MM 571 Xirallic White

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Components: This color base uses the following Uni Thinners for its mixture:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical properties

Based on special physical drying resins, it has an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l.

Elite application guide for a flawless finish

For a defect-free result, the surface must be meticulously prepared. Clean with 1-915 Silicone Remover and sand with P400 grit or finer abrasive. Apply 2 to 3 coats with a thickness of 15-25 µm. For effect colors, a final spray coat with reduced air pressure (1.2-1.5 bar) is highly recommended. Air drying at 20°C (68°F) takes 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 571 BEROBASE 500 SERIES XIRALLIC WHITE

1L

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness.Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour. Wash thoroughly after handling. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains Fatty acids, C14-18 and C16-18-unsatd., maleated, methyl methacrylate, nbutyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.

MM571