DE BEER MM 574 XIRALLIC GREEN SERIE 500 1LT

Reference MM574

De Beer MM 574 Xirallic Green from the 500 Series. Mixes 1:1 with Uni Thinner (1-141, 1-151, 1-161, 1-181) for a professional finish

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€123.50

Description

At DS COLOR we offer you paint solutions that stand out for their quality and efficiency. The De Beer MM 574 Xirallic Green basecoat is an essential component of the BeroBase 500 Series system, a product line designed for refinishing passenger cars, commercial vehicles, and coaches. This system not only provides an exceptional optical effect but also guarantees superior durability and gloss retention, which results in professional and long-lasting finishes.

BeroBase 500 Series: performance and efficiency in a simplified mixing system

The De Beer BeroBase 500 Series is distinguished by its focus on simplicity and performance. With a 1:1 mixing ratio with thinner, preparation is quick and hassle-free, which streamlines workshop workflow. Thanks to its advanced color technology, this system guarantees a precise match with most OEM finishes, making even the most complex jobs easier. As a streamlined series with fewer colors, it represents a cost-effective investment that requires less stock and minimizes waste.

Technical characteristics of MM 574 Xirallic Green

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Chemical base

Special physical drying resins.

Components

For mixing this color base, use the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical data

Its RTS viscosity is 15-17 Dincup 4/20°C and its specific weight is 0.926 kg/l.

Application process for a perfect finish

For an impeccable result, the surface must be properly prepared. It is recommended to clean with 1-951 Silicone Remover and sand with P400 grit or finer. The product is applied in 2-3 coats of 15-25 µm thickness. For a better effect, an additional spray coat can be applied with lower air pressure (1.2-1.5 bar) on the already dry or semi-dry base coat. Air drying at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 574 BEROBASE 500 SERIES XIRALLIC GREEN

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour. Wash thoroughly after handling. IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains methyl methacrylate, Fatty acids, C14-18 and C16-18-unsatd., maleated, nbutyl methacrylate, formaldehyde and maleic anhydride. May produce an allergic reaction.