COLAD EASY 2 CHECK 400ml

E9300

COLAD EASY 2 CHECK 400ml


ONLY FOR PROFESSIONAL USE

€22.50
VAT excluded

The ’glossy finish’ helps detecting any defects or colour deviations. Spray the panel after the sanding process to check repaired surfaces on irregularities. Can also be used for spray sample checks! Spray on a spray sample to create a glossy finish and check if the colour corresponds.

400 ml per can. Used to or on car panels for panel checking during the sanding process.

The most efficient and effective product to check for any irregularities while sanding panels.

EASY2CHECK®

0,4L

UFI: KFRT-N0J9-J00S-HJ26

Warning: Extremely flammable aerosol. Pressurised container: May burst if heated. May cause drowsiness or dizziness. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing dust/fume/gas/mist/vapours/spray. Call a POISON CENTRE/doctor if you feel unwell. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F. Repeated exposure may cause skin dryness or cracking. Contains: Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics. Additional labelling according to Directive 75/324/EEC relating to aerosol dispensers Extremely flammable. Pressurized container: may burst if heated. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

E9300