DE BEER MM 553 MICA WHITE SERIE 500 1LT
  • DE BEER MM 553 MICA WHITE SERIE 500 1LT

DE BEER MM 553 MICA WHITE SERIE 500 1LT

MM553

De Beer BeroBase 500 Series MM 553 Mica White. 1:1 mixing ratio with Uni Thinners (1-141, 1-151, 1-161, 1-181) for high-quality finishes.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.


ONLY FOR PROFESSIONAL USE
€57.45

At DS COLOR a century-long legacy from De Beer translates into innovation. The MM 553 Mica White basecoat is a core component of the BeroBase 500 Series system, a refinishing solution that raises the bar for passenger cars, commercial vehicles, and coaches. Its formulation ensures an extraordinary visual effect and superior durability, guaranteeing a bright, resilient finish that endures over time.

BeroBase 500 Series: simplified performance and efficiency

This system was designed to optimize your workflow. With a simple 1:1 mixing ratio with thinner, the preparation process is fast and eliminates the need for complex calculations. Thanks to De Beer's advanced color technology, the BeroBase 500 Series allows you to achieve a precise and quick match, even on the most complex jobs, being fully compatible with most OEM finishes. Its streamlined color palette reduces your stock and minimizes waste.

Technical data of MM 553 Mica White

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Compatible Thinners: For optimal performance, the basecoat is mixed with the following Uni Thinners:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Physical properties

Composed of special physical drying resins, it has an RTS viscosity of 15-17 Dincup 4/20°C and a specific weight of 0.926 kg/l, with a solids by volume percentage of 12%.

Application guide for an elite finish

For a flawless result, prepare the surface by cleaning it with 1-915 Silicone Remover and sanding with P400 grit or finer. Apply 2 to 3 coats with a thickness of 15-25 µm. To achieve the best visual effect, a final spray coat with lower air pressure (1.2-1.5 bar) is recommended. Air drying at 20°C (68°F) takes 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM553