- -19.28%

This convenient PPG kit combines the 5-liter D8140 2K UHS Clearcoat with the 2.5-liter D8244 Slow UHS Hardener, the perfect combination for achieving a professional and durable finish, especially in temperatures above 30°C.
PPG D8140 2K UHS Clearcoat (5LT)
A 2K UHS acrylic urethane clearcoat designed for repairing and repainting panels with both single-coat and 2-coat finishes. Formulated for the ENVIROBASE® High Performance color line, it offers a superior finish without the need for thinners and complies with VOC regulations. It can be applied in one or two coats. For optimal results, its use is recommended at temperatures above 15ºC and with the appropriate catalyst depending on the ambient temperature.
• For repairing and repainting single and 2-coat panels.
• No thinner needed.
• Complies with VOC regulations.
Drying: Fully dry at 60°C in 30 min, at 20°C in 16 hours, with IR in 8-15 min (depending on color).
PPG Deltron Progress D8244 Slow UHS Hardener (2.5LT)
This hardener is especially suitable for use with the D8140 UHS Clearcoat when the ambient temperature exceeds 30°C. It ensures optimal curing, providing a durable and high-gloss finish, ideal for working in hot conditions without compromising the quality of the final result.
5L
UFI: 9081-E2R5-E006-R60S
Warning:Warning. Flammable liquid and vapour. Causes skin irritation. May cause an allergic skin reaction. Causes serious eye irritation. Suspected of causing cancer. Suspected of damaging the fetus. Harmful to aquatic life with long-lasting effects. Do not handle until all safety precautions have been read and understood. Wear protective gloves, protective clothing, and eye or face protection. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Avoid release to the environment. If exposed or concerned: Get medical advice. Dispose of contents and container in accordance with local, regional, national, and international regulations.