RM SPRAY AM950 BLENDING FLASH 0,4LT.

Reference AM950/0,4LT

RM Spray AM950 BLENDING FLASH is a blending solvent that smooths the transition area.

ONLY FOR PROFESSIONAL USE

€43.65

€35.95 Save 17.64%

Description

The product is ready to use. Shake before applying.

With RM Spray AM950 BLENDING FLASH, in a 0.4LT presentation, you’ll only need to apply 2 or 3 coats to the clearcoat blending areas to smooth them out, achieving impressive results.

It smooths the transition area using blending techniques, with a drying time depending on the recommendations for the RM clearcoat being used. If needed, minor defects can be removed by polishing with any standard fine polishing compound once the clearcoat has fully cured.

AM 950 0,4L BLENDING FLASH

0,4L

UFI: R3CU-3CYQ-G00G-9MHN

Warning: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Do not pierce or burn, even after use. Keep away from heat, hot surfaces, sparks, open flames and otherignition sources. No smoking. Call a POISON CENTER or physician if you feel unwell. Protect from sunlight. Do no expose to temperatures exceeding 50 °C/122°F. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container to hazardous or special waste collection point. Hazard determining component(s) for labelling: 2-methoxy-1-methylethyl acetate, n-butyl acetate