DE BEER MM 537 RED SERIE 500 1LT

Reference MM537

The De Beer MM 537 Red basecoat from the 500 Series mixes 1:1 with Uni Thinner (1-141, 1-151, 1-161, 1-181). Ensures perfect color matching.

The colors of the De Beer 500 Series (BeroBase) require the use of base additives MM 577 or MM 588 in metallic and pearl shades for a uniform finish. In some colors, MM 5091 is also used to control the flop effect and ensure maximum color accuracy.

ONLY FOR PROFESSIONAL USE

€38.95

Out-of-Stock

Description

At DS COLOR we know that choosing the right paint is essential. That's why we offer the De Beer MM 537 Red basecoat, a vibrant color that is part of the reliable BeroBase 500 Series system. This system, designed with over 110 years of expertise, delivers an exceptional finish with superior durability, perfect for refinishing passenger cars, commercial vehicles, and coaches. The result is a professional, glossy, and hard-wearing finish.

A paint solution with minimum effort, maximum precision

The De Beer BeroBase 500 Series is designed to simplify your work. Its innovative 1:1 mixing ratio with thinner eliminates the need for complex calculations, streamlining the entire preparation and application process. De Beer's advanced color technology ensures an exact color match from the first coat, ensuring that every job is completed with maximum precision. In addition, as a streamlined system with fewer colors, it allows you to reduce product inventory, which translates into greater efficiency and profitability.

Components and features of MM 537 RED

Base Additives

For optimal finishes, especially in metallic and pearlescent shades, the 500 Series colors are always used in combination with the following additives:

· De Beer MM 577
· De Beer MM 588
· De Beer MM 5091 (Flop control additive to adjust metallic orientation and ensure maximum color accuracy)

Components

This color base is used with the following Uni Thinners for optimal performance:

· 1-141 Uni Thinner Fast
· 1-151 Uni Thinner Medium
· 1-161 Uni Thinner Slow
· 1-181 Uni Thinner Ultra Slow

Technical data: With a chemical base of special physical drying resins, its RTS viscosity is 15-17 Dincup 4/20°C. Its specific weight is 0.926 kg/l, with 12% solids by volume.

Application guide for a flawless finish

To ensure a flawless result, the surface must be prepared by cleaning with 1-951 Silicone Remover and sanding with P400 grit or finer. Apply the product in 2-3 coats with a thickness of 15-25 µm. For effect colors, an additional coat is recommended with an air pressure of 1.2-1.5 bar. The air drying time at 20°C (68°F) is 10-15 minutes to be dust-free and 15-20 minutes to be dry to handle.

MM 537 BEROBASE 500 SERIES RED

UFI:

Warning: Flammable liquid and vapour. Causes skin irritation. Causes serious eye damage. May cause drowsiness or dizziness. Wear protective gloves. Wear eye or face protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid breathing vapour or spray. Wash thoroughly after handling.IF INHALED: Call a POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and wash it before reuse. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. Store in a well-ventilated place. Keep container tightly closed. Dispose of contents and container in accordance with all local, regional, national and international regulations. Contains n-butyl methacrylate, methyl methacrylate and formaldehyde. May produce an allergic reaction.